Sunday, 13 November 2011

Week 3 lab 2 part 2 washboard

Set menu set to polygons,create a polygonal cube on the grid.Set its width ,height and depth,set subdivisions width to 17,height and depth to -1.

Change to edge mood, select the interior edges on the top of the box.

Choose edit mesh > bevel> option >reset settings.set width to 0.6.Then press apply.




Change to face mood,select the faces formed by the bevel on the top of the box.
Choose edit > reset setting.then press apply.Move the manipulator up a distance of 0.6 on the Z axis.





Change to edge mood,select the faces formed by the bevel on the top of the box.
choose Edit Mesh > Bevel.set width to 0.5 and segments to 2.press apply
Then change back to object mood.




create another cube,polycube2.set width,height and depth,subdivisions width ,height and depth and its position.
create the third cube,poly cube3 and set their width height and depth and subdivisions.


Select both cube 2 and cube 3,choose Modify > Align Tool to align two object as image shown above.




Create the forth cube ,polycube4,set its width,height and depth and subdivisions.Then use the align tool to place it ,centered along the opposite edge of the top panel.





For copy another cube 4,choose Edit > Duplicate,Press w for the Move Tool and move the new stringer toward
the other end of the glass along the X axis,then set its position.



create the fifth cube ,polycube5 along the width of the glass.set its width height and depth,subdivision.
Use the align tool again to adjust its position as image shown above.



Duplicate the left leg, rename it leg_right and align it to the other side of the washboard.

select cube 2,3,4,4(copy),5,(5copy).choose Edit Mesh > Bevel>option,set width to 0.2.Press apply.


Select the glass.choose Window > Outliner.Using the MMB, drag glass over top_header in the Outliner.Top_header shows in green with a + sign next to it.
Choose the + sign and observe the glass is now linked.






REFLECTION:
After this excercise,i konw more about using align tool.when i using align tool to modify the positon  of two objects,it is quite difficult to move the object to right position.For align tool,i still need to practice a lot.And now i have been training to use bevel tool and extrude tool and many transforms tools.

No comments:

Post a Comment