Wednesday, 30 November 2011

Toy modeling

create a cube then copy this cube

create a cylinder


bevel the cylinder edges

duplicate another 7 cylinders.put position like picture show


create a cube

change to vertex mood and drag medium three vertice up

bevel the cube edges.

create a cone and sphere.



create a another cube and bevel its edges.

create two sphere .

create another cube and bevel its edges.




create a helix



done.

reflection
After this exercise i know more about bevel function ,and i also can move object position faster.

Sunday, 20 November 2011

Week 4 Lab 2 - E-learning

1.Does multi-tasking give you a real or false sense of having accomplished something?



Nowadays human multitasking is becoming common phenomenon.I can see many students is using computer while listening lecturer.People think this way can improve efficiency in working and studying .I think it depends different people.Some people can control their attention consistently ,but most of people could cause more errors due to insufficient attention.It is inevitable to use only use single task today,a low level of multitasking indeed could help people do two things at same time .For this case,muti-tasking don't give me  a false sense at all ,but I think heavy muti-tasking gives a false sense to me ,it is because there are many tasks distract me and it is difficult to control my attention to particularly one,so more errors come out when doing something.

2.Is learning 3D and design different from learning programming, or is all learning the same?Why?

I feel different when I learning 3D and learning programming.Learning 3D is a interesting thing,I can model the shape I want  it becomes.You learn different skill in modeling and trying every key board and tools.For programming,you should really learn some programing knowledge not only from Flash software.Programming also require you to know how to write programming lauguage,use this language to get different output.

3.The article states that “Learning is actually a very complex operation for an individual”. Do you agree with this? Do you feel that you approach your learning in the best way – if yes, how, and if no, how can you change your work style?

Yes,I agree learning is a very complex operation for individual.It is important to learn new knowledge by your heart then you can apply it .when you really start to learn,you should watch intently,hear carefully to lecturer,thinking what he say.But people often distracted by other things when they are learning,so they choose their own way to make learning more efficient.I think preview new knowledge before lecture,review them after lecture and do homework independently is best way to learn .

4.What are your thoughts about the last paragraph in the extract?

The last paragraph maybe want to say that when you pay attention to learn knowledge,you could get the knowledge easier than those doing muti-tasking.And now students always make study complicated when they study ,carrying many electronic devices but  is hard to really get knowledge.

5.Should your lecturers also focus on your work attitude, or just leave you to sink or swim on your own? Why?

I think lecturer should do both way.Students need learning attitude which sometimes they lacks.If Lecturer  could focus on student attitude ,student can pay attentionto  learn fast.Also lecturer need to give students space to think independently,so they could absorb what they learn in lecture.



REFLECTION:
After this reading,i know the effects that muti-tasking can bring and i would search more effective way to learn knowledge and use it .

Sunday, 13 November 2011

Week 3 lab 2 part 2 washboard

Set menu set to polygons,create a polygonal cube on the grid.Set its width ,height and depth,set subdivisions width to 17,height and depth to -1.

Change to edge mood, select the interior edges on the top of the box.

Choose edit mesh > bevel> option >reset settings.set width to 0.6.Then press apply.




Change to face mood,select the faces formed by the bevel on the top of the box.
Choose edit > reset setting.then press apply.Move the manipulator up a distance of 0.6 on the Z axis.





Change to edge mood,select the faces formed by the bevel on the top of the box.
choose Edit Mesh > Bevel.set width to 0.5 and segments to 2.press apply
Then change back to object mood.




create another cube,polycube2.set width,height and depth,subdivisions width ,height and depth and its position.
create the third cube,poly cube3 and set their width height and depth and subdivisions.


Select both cube 2 and cube 3,choose Modify > Align Tool to align two object as image shown above.




Create the forth cube ,polycube4,set its width,height and depth and subdivisions.Then use the align tool to place it ,centered along the opposite edge of the top panel.





For copy another cube 4,choose Edit > Duplicate,Press w for the Move Tool and move the new stringer toward
the other end of the glass along the X axis,then set its position.



create the fifth cube ,polycube5 along the width of the glass.set its width height and depth,subdivision.
Use the align tool again to adjust its position as image shown above.



Duplicate the left leg, rename it leg_right and align it to the other side of the washboard.

select cube 2,3,4,4(copy),5,(5copy).choose Edit Mesh > Bevel>option,set width to 0.2.Press apply.


Select the glass.choose Window > Outliner.Using the MMB, drag glass over top_header in the Outliner.Top_header shows in green with a + sign next to it.
Choose the + sign and observe the glass is now linked.






REFLECTION:
After this excercise,i konw more about using align tool.when i using align tool to modify the positon  of two objects,it is quite difficult to move the object to right position.For align tool,i still need to practice a lot.And now i have been training to use bevel tool and extrude tool and many transforms tools.

Week 3 Lab1 (Track Modelling)

Create a polygonal plane and drag out to create a rectangle,set width and height in channel Box.


Hold the right-click option and choose Assign New Material > Blinn from the menu, In the Attribute Editor > Common Material Attributes dropdown,choose the button next to Color, In the Create Render Node dialog, under 2D Textures, choose File, In the File Attributes drop-down, click the file icon next to Image Name and navigate to the file in the sourceimages
folder called Track Outline.jpg. In the Front panel, turn on Smooth Shade all and Textured from the Panel Toolbar to see the image on the plane.Then On the Menu Bar, choose Edit UVs > Normalize to make image show at the correct size on work plane.




Tag spacebar to switch to four layout.Click on front panel, On the main menus, choose Mesh > Create Polygon Tool.Now  start with a vertice in this shape and Continue to click on the corners in a clockwise pattern. Hold the shift key when necessary to create straight lines.When you nearly finished,do not click on the original vertex again, press Enter on the keyboard and Maya connects the last vertex to the first.Then you may also back perspective panel ,pull out original shape to separate from the new polygons shape,and choose vertex to adjust new polygons.At last rename the polygon to Track Profile1,set old image shape to invisibility.



Back to the main panel, choose Edit Mesh > Extrude >Extrude option.Set  the Divisions to 20 and choose Apply then Close.Then extrude the poly gon on the Zaxis.Set Local translate Z to 45,then change back to object mood.




Change to the edge mood , choose Edit Mesh > Insert Edge Loop Tool>option ,set the Number of edge loops to 2.Now I create two edges evenly spaced along the length of the track at the top of the slot.Use scale tool to scale the lines 2.9 apart on the X axis.



Now ,change to the face mood,select the face as image shown above. choose Edit Mesh > Extrude.in the extrude option ,set the Divisions to 1 and choose Apply, then Close.Then extrude the polygon a small amount of 0.2 on the Z axis.



Click on the new face created at the end. Press g to repeat the Extrude command, Extrude the polygon a small amount of 3 on the Z axis.



Change to edge mood and choose two edges at outer corners of the new polygon.


choose Edit Mesh > Bevel >bevel option,set width to 0.5,and segments to 1. ,press apply

Switch the Menu Set to Animation, choose Create Deformers > Nonlinear > Bend>option to set Curvature to 1.Then press apply.


In the bend1Handle Channel Box, set Rotate X to -90. choose Window > Outliner, select bend1Handle + Hold down the MMB+ctrl to drag bend1Handle over Track_Profile1.




RFLECTION:
After this excercise,i know how to convert  a 2D image to a 3D shape.And i learnt a new tool called Create polygons tool.And i know Create Deformers > Nonlinear > Bend to change the shape direction and angle when i change to animation mood.