Sunday, 13 November 2011

Week 2 Lab 2 Cardboard box modelling

set the Menu Set to Polygons,On the shelf, select Polygons,Create a polygonal cube on the grid.From channel box,set cube’s width ,height and depth,subdivisions ,translate x.y.z to places the bottom of the box on the grid.




Right-click to change to vertex mood,region-select in the center of the box depth (length)-wise.Use the move tool to scale vertices by entering 2.9 in the X axis window.




 Region-select the vertices in the center of the box width-wise, Scale the vertices by entering 2.92 in the Z axis window.
 Return to the perspective display choose the top face in the center of  the box.


Choose the top face in the center of box ,choose edit mesh > extrude >extrude option then choose reset settings and apply.Since mamipulator appear ,move the manipulator down a short distance on the Z axis,and set Z to -29.5 from channel box.




Press shift to select four faces in the center of top section,apply extrude command and move the manipulator up a short distance of 0.2 on the Z axis.


Apply  extrude command on four face again and move the manipulator up a distance of 17 on the Z axis.


Select the center face on the top of the one end flap,use scale tool to scale the end flap a short distance away from the side flaps.Then use the same way to scale the rest of flaps.
Later,change to vertex mood, Select the vertices on the top of one side flap, Press the down arrow to pick-walk, or move the selection to the next vertices below, Add the top vertices on the side flap to the selection.Total 8 vertices of flap is selected.





Tap spacebar to change to front layout for main panel,choose rotate tool,press fn+left arrow to adjust rotate pivot point,move the pivot point near the lower selected vertices on the outside of the box, Press insert again to return the manipulator to normal mode,Now rotate the flap out a small amount.



Use the same way to do the rest of flaps then change back to perspective panel.


Right-click and choose edge, choose Edit Mesh > Insert Edge Loop Tool, Click on the top edge of each flaps to split the faces into 4 section in length-wise and 3 sections in width-wise.



Next I bevel the edge on the flaps and on the side,bottom and interior of the box. choose Select > Select Edge Ring Tool to speed up selection of the edges along the side.Then highlight edges as picture above shows.
In the Hotbox, choose Edit Mesh > Bevel > bevel option >reset settings.Set width to 1 and Segments to 1.Press apply.



Change to vertex mood, Select the vertices at an inner edge loop on the top of a side flap, Double-click on the Move Tool icon and choose the set to face bottom.Now,click on top face and drag manipulator to create an irregular shpe to the edge.Then do the same way to the rest of flaps.


Change back to object mode,choose Mesh > smooth >smooth option ,set division levels and continuity.Then press apply.Now the box is smoothed.



On the starus line switch menu set to animation, choose Create Deformers > Nonlinear > Wave. set Amplitude to .01 and Wavelength to 2. Under wave2Handle set Rotate X and Z to 90
The deformers need to be linked to the box, so the effect remains the same when the box is moved. On the Menu Bar, choose Window > Outliner, In the outliner, choose wave1Handle and wave2Handle and hold down the MMB +ctrl to drag these two into  box_open.



REFLECTION: After this exercise,i know how to use different tools to make shape look better .Especially for using scale tool and rotate tool.Now i know more about applying these two tools,like change pivot point,creat irregular shape.I also learn how to smooth the shape surface,make shape looks better .

No comments:

Post a Comment